incolator
EN
EN

Percentage Change Calculator

The percentage change calculator compares a new value with its original value. The result names an increase, a decrease, or no change, and shows the base used for the comparison.

Result25%

Your numbers

Example inputs. Results update as you type.

Example
Example

Use a dot for decimals. Up to 120 digits and 80 decimal places per number; no grouping commas or exponents.

Increase

25%

Increase of 25%, using the magnitude of the original value as the base.

Decimal expansion: terminating.

What to check next

How the calculation works

The original value sets the base. With negative originals, this page divides by their magnitude: a higher signed value is an increase and a lower signed value is a decrease. This is an explicit algebraic convention, not a claim about investment returns.

Step-by-step solution
  1. New − original = 20
  2. Magnitude of original = 80
  3. 20 ÷ 80 × 100 = 25%
Original and new values
Original: 80
New: 100

Examples

Forward change — 25%

Increase of 25%, using the magnitude of the original value as the base.

Original value
80
New value
100
  1. New − original = 20
  2. Magnitude of original = 80
  3. 20 ÷ 80 × 100 = 25%
Reverse direction — -20%

Decrease of 20%, using the magnitude of the original value as the base.

Original value
100
New value
80
  1. New − original = -20
  2. Magnitude of original = 100
  3. -20 ÷ 100 × 100 = -20%
Negative original — -25%

Decrease of 25%, using the magnitude of the original value as the base.

Original value
-80
New value
-100
  1. New − original = -20
  2. Magnitude of original = 80
  3. -20 ÷ 80 × 100 = -25%
No change — 0%

No change of 0%, using the magnitude of the original value as the base.

Original value
80
New value
80
  1. New − original = 0
  2. Magnitude of original = 80
  3. 0 ÷ 80 × 100 = 0%

How this is calculated

Change (%) = (new − original) / |original| × 100.

The signed gap and magnitude of the original are retained exactly. Only the displayed percent is rounded, to 12 decimal places; close values do not disappear through intermediate rounding.

Reviewed

Continue exploring calculators

Questions

Why are the forward and reverse changes different?

The base changes when the direction reverses. Moving from 80 to 100 adds 20 relative to 80; moving back removes 20 relative to 100.

Can I calculate a percentage change from zero?

No. A zero original makes the denominator zero. The absolute difference remains meaningful, but the ordinary percentage change does not.

How are negative originals interpreted?

The denominator is the absolute original. Direction follows new minus original. This avoids reversing the direction merely because the original is negative.

Should I use percentage difference instead?

Use difference when neither value is the original and you want a symmetric comparison. Change answers a directional before-and-after question.

The arithmetic is exact for the numbers entered; rounded decimals are approximations. Applying a result to measured or estimated quantities also carries their uncertainty. General mathematical information, not professional advice.

Calculation checks and limits

We tested the exact rational results under the stated conventions with checks every answer must pass and with worked examples. We did not compare it with a separate calculation or an outside program. Measurement uncertainty and the meaning of real-world inputs are not covered by these checks; they require context outside the mathematical model.